NEMTEK
Nemtek Side Mount Bracket Single Sensor (N.E-TW/1WSM/S)
Nemtek Side Mount Bracket Single Sensor
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The side mount bracket with sensor will set off an alarm if the wires are cut or if there is an attempt to part the wires in order to gain entry. Each sensor is placed in the middle of a straight run and can detect up to a 100m span of wires. The tension wire system can be combined with an electric fence system. The combination of taut wires and a monitored electric fencing system creates a formidable detection and deterring barrier.
Features:
• The tension wire sensor can detect a rapid change of tension and send an alarm condition to the controller
• Built-in filter to reduce unwanted false alarms due to weather conditions and changes in tension over time
• Will notify the controller if an adjustment is required on the sensor
• Can be programmed from the controller .
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• The tension wire sensor can detect a rapid change of tension and send an alarm condition to the controller
• Built-in filter to reduce unwanted false alarms due to weather conditions and changes in tension over time
• Will notify the controller if an adjustment is required on the sensor
• Can be programmed from the controller .
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Side Mount Bracket Single Wire (N.E-TW/1WSM/P)
Nemtek Side Mount Bracket Single Wire
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The Side bracket is used to guides the wire to the tension sensor bracket. It can also be used as an end or corner bracket. The built in insulator allows the wire to be electrified for higher security.
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Wall Top Bracket Single Sensor (N.E-TW/1WS)
Nemtek Wall Top Bracket Single Sensor
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The wall top bracket with sensor will set off an alarm if the wires are cut or if there is an attempt to part the wires in order to gain entry. Each sensor is placed in the middle of a straight run and can detect up to a 100m span of wires. The tension wire system can be combined with an electric fence system. The combination of taut wires and a monitored electric fencing system creates a formidable detection and deterring barrier.
Features:
• The tension wire sensor can detect a rapid change of tension and send an alarm condition to the controller
• Built-in filter to reduce unwanted false alarms due to weather conditions and changes in tension over time
• Will notify the controller if an adjustment is required on the sensor
• Can be programmed from the controller .
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• The tension wire sensor can detect a rapid change of tension and send an alarm condition to the controller
• Built-in filter to reduce unwanted false alarms due to weather conditions and changes in tension over time
• Will notify the controller if an adjustment is required on the sensor
• Can be programmed from the controller .
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Wall Top Bracket Single Step (N.E-TW/1WP45)
Nemtek Wall Top Bracket Single Step
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The wall top bracket step is used to guide the wire to the tension sensor bracket when there is a step in the wall. The built in insulator allows the wire to be electrified for higher security.
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a nemtek energizer
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Wall Top Bracket Single Wire (N.E-TW/1WS)
Nemtek Wall Top Bracket Single Wire
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The wall top bracket is used to guide the wire to the tension sensor bracket. It can also be used as an end or corner bracket. The built in insulator allows the wire to be electrified for higher security.
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Wall Top Bracket Three Wire (N.E-TW/3WP)
Nemtek Wall Top Bracket Three Wire
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The wall top bracket is used to guide the wire to the tension sensor bracket. It can also be used as an end bracket. The built in insulator allows the wire to be electrified for higher security.
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Wall Top Bracket Three Wire Corner (N.E-TW/3WC)
Nemtek Wall Top Bracket Three Wire Corner
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The wall top corner bracket is used to terminate and start the wires at a 90 degree corner. The built in insulator allows the wire to be electrified for higher security.
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek Wall Top Bracket Three Wire Sensor (N.E-TW/3WS)
Nemtek Wall Top Bracket Three Wire Sensor
Fasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
PRODUCT DETAILS
The wall top bracket with sensors will set off an alarm if the wires are cut or if there is an attempt to part the wires in order to gain entry. Each sensor is placed in the middle of a straight run and can detect up to a 100m span of wires. The tension wire system can be combined with an electric fence system. The combination of taut wires and a monitored electric fencing system creates a formidable detection and deterring barrier.
Features:
• The tension wire sensor can detect a rapid change of tension and send an alarm condition to the controller
• Built-in filter to reduce unwanted false alarms due to weather conditions and changes in tension over time
• Will notify the controller if an adjustment is required on the sensor
• Can be programmed from the controller .
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Features:
• The tension wire sensor can detect a rapid change of tension and send an alarm condition to the controller
• Built-in filter to reduce unwanted false alarms due to weather conditions and changes in tension over time
• Will notify the controller if an adjustment is required on the sensor
• Can be programmed from the controller .
• Heavy duty design
• Hot dip and powder coated finish
• Can be electrified using a Nemtek energizer
Specifications
Insulator: UV stabilised polymersFasteners: Stainless steel
Loop: Heavy galvanised
Body: Hot dip galvanised and powdercoated finish
Made To Order
Nemtek screw - Jurrasic self tapper hook (N.EA-JSTH)
Jurassic insulator fastener
Jurassic insulator fastener is a self tapping hook to fasten the Jurassic insulator to the square tube brackets.
Price Excludes vat
Nemtek Bobbin insulator - Flat Bar (N.EI-BFBB)
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life.
Flat bar insulator
The flat bar insulator is used with the flat bar profile posts.
The flat bar insulators have the following features:
• quick fit clips on the top and bottom for faster installation
• feed through clip option built in
• easy to change and maintain
They are available in black, white or beige
The flat bar insulators have the following features:
• quick fit clips on the top and bottom for faster installation
• feed through clip option built in
• easy to change and maintain
They are available in black, white or beige
Specifications
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life.
Price Excludes vat.
Nemtek Bobbin insulator - Round Bar - Black (N.EI-BRBB)
UV stabilised for external use.
Only virgin materials are used in their manufacture which are designed for a long life.
Round Bar Insulator
The round bar insulator is used with the 10mm roundbar.
The round bar insulators have the following features:
They are available in black or white.
The round bar insulators have the following features:
- flexible inner core for increased clearance
They are available in black or white.
Specifications
UV stabilised for external use.
Only virgin materials are used in their manufacture which are designed for a long life.
Price Excludes vat.
Nemtek Spring Hook - Modulas/Jurassic - Stainless Steel (N.ES-HK/MOD)
Nemtek Spring Hook - Modulas/Jurassic - Stainless Steel
The Modulus and Jurassic hooks are used with the spring tensioners to tension the wire on a 3 way corner/end Modulus post.
These hooks are also used with the Jurassic insulator.
These hooks are also used with the Jurassic insulator.
Price Excludes vat
Nemtek Spring Hook-SS-large tail (N.ES-H/LT)
Nemtek Spring Hook-SS-large tail
The large tail hooks are a quick fit hook system for the Nemtek flat and round bar insulators.
They offer the following features:
Heavy duty 2.5 mm large tail heavy duty hooks are also available.
They offer the following features:
- stainless steel finish for long life expectancy
- have a large tail to fit the Nemtek range of tensioning devices
- fit quickly onto the Nemtek round and flat bar insulators.
Heavy duty 2.5 mm large tail heavy duty hooks are also available.
Price Excludes vat.
Nemtek electric fence nail on insulator - black (N.EI-NOB)
Nail On Insulator-Black
The nail on insulators are screwed onto metal brackets or wooden posts.
The nail on insulators have the following features:
- large clips for heavy duty applications
- larger clearance to eliminate power leakage
They are available in black or white.
Price Excludes vat
Nemtek Y-Standard insulator-black-including clip (N.EI-YB)
Y Standard Insulator
The Y standard insulator is used with the Nemtek Ystandard posts (Iscor).
The Y standard insulators have the following features:
- quick fit design and are easy to replace when required.
There is an anti-climb version available.
They are available in both black or white.
Specifications
UV stabilised.
Only virgin materials are used in their manufacture which are designed for a long life.
Price Excludes vat
Nut for Strainer Post Bolt M10 HDG (NEA-SCRM10NUTSHD)
Nut for Strainer Post Bolt M10 HDG
PRODUCT DETAILS
The strainer posts bolt is used be used to secure the corners posts and the stays in free-standing electric fences. The round posts are concreted into the ground and secured by 2 stays at 90 degree angles for corner applications. The round posts only require one stay in the direction of the wire tension in an end post application.
The round post are supplied with two sets of holes to secure the stay posts.
Specifications
M10 x 120mm
Hot dip galvanised finish
Price Excludes vat
Nemtek Bobbin insulator - Popem (N.EI-POPEM\B\ULT)
UV stabilised for external use.
Only virgin materials are used in their manufacture which are designed for a long life.
Pop Through Hole Insulator
Pop through hole insulators are used on the picket intermediate posts.
The pop through hole insulators have the following features:
• offer a larger creepage distance to reduce power loss and arcing.
• feed through clip option built in to thread the wire through for higher security
They are available in black or white
The pop through hole insulators have the following features:
• offer a larger creepage distance to reduce power loss and arcing.
• feed through clip option built in to thread the wire through for higher security
They are available in black or white
Specifications
UV stabilised for external use.
Only virgin materials are used in their manufacture which are designed for a long life.
Price Excludes vat.
Nemtek Picket insulator black - Including Clip (N.EI-PI)
Picket insulator
The picket insulator is used with the Nemtek steel picket posts. Also compatible with the star pickets.
The picket insulators have the following features:
- a double tracking fin to reduce tracking and arcing
- quick fit design
- easy to replace when required.
They are available in black.
Specifications
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life.
Price Excludes vat.
Nemtek Omega insulator with clip - black (N.EI-OB)
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life
Nemtek Omega insulator with clip - black
The Omega insulators are designed to be used with the Nemtek Omega range of posts.
The Omega insulators have the following features:
They are available in black.
There is an anti-climb version available known as the Omega collapsible.
This version will not support a load greater than 20 kg.
The Omega insulators have the following features:
- double tracking fin to reduce tracking and arcing
- quick fit design
- easy to replace when required
They are available in black.
There is an anti-climb version available known as the Omega collapsible.
This version will not support a load greater than 20 kg.
Specifications
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life
Price Excludes vat
Nemtek Jurassic Insulator - white 6.2mm (N.E-JIW6.20)
Diameter of mounting hole-6.2 mm
UV stabilised for external use
Virgin materials are used in their manufacture which are designed for a long life
Jurassic insulator
The Jurassic insulator is used for square tubing brackets.
The Jurassic insulators have the following features:
• a much longer tracking distance for less arcing in areas where there is pollution and salt buildup
• feed through option to thread the wire for maximum security
• slotted clip option available for a quicker wire placement
They are available in black.
A self tapping hook is available to fasten the Jurassic insulator to the square tubing. This is sold separately.
The Jurassic insulators have the following features:
• a much longer tracking distance for less arcing in areas where there is pollution and salt buildup
• feed through option to thread the wire for maximum security
• slotted clip option available for a quicker wire placement
They are available in black.
A self tapping hook is available to fasten the Jurassic insulator to the square tubing. This is sold separately.
Specifications
Diameter of mounting hole-6.2 mm
UV stabilised for external use
Virgin materials are used in their manufacture which are designed for a long life
Price Excludes vat.
Nemtek Modulus Spacer Insulator- Black (N.EMOD-BSPR)
Nemtek Modulus Spacer Insulator- Black
Size: 100mm in length
Nemtek Modulus Spacer Insulator- Black
PRODUCT DETAILS
The Modulus slide spacer can be used with the 2 way and 3 way Modulus posts. Its used when no wire is needed at that part of the modulus bracket
Features:
• Easy slide in with no fasting required
Features:
• Easy slide in with no fasting required
Specifications
Material: UV stabilised plasticSize: 100mm in length
Price Excludes vat
Nemtek Modulus Slide Insulator - Black (N.EMOD-BSLD)
Nemtek Modulus Slide Insulator - Black
Size: 100mm in length
Nemtek Modulus Slide Insulator - Black
PRODUCT DETAILS
The Modulus slide insulators are used with the 2 way and 3 way Modulus posts.
Features:
• These insulators have two wire connection options. Clip on or a through hole
• Easy slide in with no fasting required
Features:
• These insulators have two wire connection options. Clip on or a through hole
• Easy slide in with no fasting required
Specifications
Material: UV stabilised plasticSize: 100mm in length
Price Excludes vat
Nemtek strain insulator - jumbo - black (N.EI-STB/J)
Virgin plastics: UV stabilised for external use.
Colours: Black and white
Working max load: 30 kgs
Strain insulator - Jumbo
Nemtek strain insulators are used at the begining or at the end of an electric fence wire run. The strain insulator - Jumbo is suitable for fence wire diameters up to 2.0 mm and a working load of 30 kgs.
These strainers are available in black or white. Only virgin materials are used in their manufacture which are designed for a long life. They allow for larger creepage distance to reduce power loss.
These strainers are available in black or white. Only virgin materials are used in their manufacture which are designed for a long life. They allow for larger creepage distance to reduce power loss.
Specifications
Virgin plastics: UV stabilised for external use.
Colours: Black and white
Working max load: 30 kgs
Price Excludes vat.
Nemtek Bobbin Tensioner - Large - Black (N.EI-BTL)
Tension bobbin insulator large
Tension bobbin insulators are used with the offset brackets where fire is not a concern.
These insulators are large and robust..
They are available in black only.
Specifications
UV stabilised for external use.
Only virgin materials are used in their manufacture.
Price Excludes vat.
Nemtek Omega insulator including clip-black-collapsible (N.EI-OB/C)
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life
Nemtek Omega insulator including clip-black-collapsible
The Omega insulators are designed to be used with the Nemtek Omega range of posts.
The Omega insulators have the following features:
They are available in black.
There is an anti-climb version available known as the Omega collapsible.
This version will not support a load greater than 20 kg.
The Omega insulators have the following features:
- double tracking fin to reduce tracking and arcing
- quick fit design
- easy to replace when required
They are available in black.
There is an anti-climb version available known as the Omega collapsible.
This version will not support a load greater than 20 kg.
Specifications
UV stabilised for external use.
Virgin materials are used in their manufacture which are designed for a long life
Price Excludes vat (made to order)
Nemtek Spring Hook-SS-large tail-heavy duty (N.ES-H/LT/2.5)
Nemtek Spring Hook-SS-large tail-heavy duty
The large tail hooks are a quick fit hook system for the Nemtek flat and round bar insulators.
They offer the following features:
Heavy duty 2.5 mm large tail heavy duty hooks are also available.
They offer the following features:
- stainless steel finish for long life expectancy
- have a large tail to fit the Nemtek range of tensioning devices
- fit quickly onto the Nemtek round and flat bar insulators.
Heavy duty 2.5 mm large tail heavy duty hooks are also available.
Price Excludes vat.
Nemtek strain ultra insulator - black (N.EI-STB/R)
Strain insulator - Ultra
Nemtek strain insulators are used at the beginning or at the end of an electric fence wire run. The strain insulator - Ultra is suitable for fence wire diameters up to 2.5 mm and a working load of 40 kgs. The strain insulator Ultra hardened is suitable for wire diameter of 3 mm and a working load of 140 kgs
The strainer insulator - Ultra is available in black or white and the Ultra hardened in black only. Only virgin materials are used in their manufacture which are designed for a long life. They allow for larger creepage distance to reduce power loss.
Specifications
Virgin plastics: UV stabilised for external use.
Colours: Black and white and only black for the Ultra hardened
Working max load: 40 kgs for the Ultra
140 kgs for the Ultra hardened
Price Excludes vat.
Nemtek Thick Wire and Rope Insulator Black (NEAI-TWRI/B)
Nemtek Thick Wire and Rope Insulator
PRODUCT DETAILS
The thick wire or poly rope insulator can be screwed or nailed onto a wooden post.
Features:
• It can carry up to a 3 mm wire and a 6 mm poly rope
• Robust construction to minimise risk of breakage
Specifications
Material: UV stabilised plastic
Price Excludes vat
Nemtek Thick Wire and Rope Insulator White (NEAI-TWRI/W)
Nemtek Thick Wire and Rope Insulator
PRODUCT DETAILS
The thick wire or poly rope insulator can be screwed or nailed onto a wooden post.
Features:
• It can carry up to a 3 mm wire and a 6 mm poly rope
• Robust construction to minimise risk of breakage
Specifications
Material: UV stabilised plastic
Price Excludes vat
Nemtek Bobbin insulator - Porcelain - Fireproof (N.E-BPFL)
Bobbin large insulator-Porcelain
The porcelain round bobbin insulator is used on the intermediate posts as well as the offset brackets.
The porcelain round bobbin insulators have the following features:
• Fireproof
• Large design to reduce power loss
• Suitable for long runs
• Can withstand high tension
These insulators are made of porcelain and can withstand high temperatures for a prolonged period of time.
Specifications
Porcelain for external use.
Fire proof
Colours: white
Price Excludes vat.