CENTURION
Centurion POLOphone Handset Mounting Plate
POLOPHONE – AUDIO INTERCOM SYSTEM
The POLOphone is a uniquely styled intercom system that offers outstanding features, state of the art design and excellent value for money. The POLOphone is also a proud winner of the prestigious SABS Design Institute’s Design Excellence Awards.
MAIN FEATURES:
- Only two wires for a simple, quick and easy installation.
- Expandable up to five components with a maximum of two Entry Panels.
- Each panel fitted with two Call Buttons.
- Single or dual call button Modes of Operation.
- Intercommunication between two groups of Handsets.
- Award-winning style Handset.
- Each handset incorporates:
– Gate release for each Entry Panel.
– Auxiliary control button.
– Intercommunication Call Button.
– Gate status LED. - 12V DC operation with optional battery backup.
- Built-in lightning protection.
- To maximise the security of the installation an optional POLOswitch1 may be fitted
POLOPHONE TECHNICAL DATA:
DESCRIPTION | |
---|---|
Input Voltage 1 | 12V – 14V DC supplied at anyone of the components 1 |
Current Draw | Quiescent – 150mA ±60mA for a One-to-One kit maximum – 200mA |
Speech Volume | Adjustable at each Entry Panel and handset |
Wiring | Two common wires polarised for speech, call and lock release |
Ring tone | Electronic while button is depressed with separate tones when calling from each Entry Panel in a system or between groups of handsets |
Call Confirmation at Entry Panel | [*] |
Wiring Distance | Refer to thickness chart in the Manual |
Gate/Door Release | Potential-free normally-open contact |
Handset Auxiliary Contact | Requires separate wiring via two-wire bus |
Operating Temperature | -20°C to +50°C |
Humidity | 0 – 90% (non-condensing) |
Degree of Protection | IP55 |
Surge Protection | [*] |
Packaging Dimensions | |
Handset | Length: 70mm x Width: 47mm x Height: 211mm |
Entry Panel | Length: 70mm x Width: 40mm x Height: 150mm |
[*] – If the 12V DC gate motor supply dips when the motor starts up and the intercom is being used at the same time, the speech quality might be affected.
Centurion POLOphone Power Supply (Two Pin mains Adaptor)
POLOPHONE – AUDIO INTERCOM SYSTEM
The POLOphone is a uniquely styled intercom system that offers outstanding features, state of the art design and excellent value for money. The POLOphone is also a proud winner of the prestigious SABS Design Institute’s Design Excellence Awards.
MAIN FEATURES:
- Only two wires for a simple, quick and easy installation.
- Expandable up to five components with a maximum of two Entry Panels.
- Each panel fitted with two Call Buttons.
- Single or dual call button Modes of Operation.
- Intercommunication between two groups of Handsets.
- Award-winning style Handset.
- Each handset incorporates:
– Gate release for each Entry Panel.
– Auxiliary control button.
– Intercommunication Call Button.
– Gate status LED. - 12V DC operation with optional battery backup.
- Built-in lightning protection.
- To maximise the security of the installation an optional POLOswitch1 may be fitted
POLOPHONE TECHNICAL DATA:
DESCRIPTION | |
---|---|
Input Voltage 1 | 12V – 14V DC supplied at anyone of the components 1 |
Current Draw | Quiescent – 150mA ±60mA for a One-to-One kit maximum – 200mA |
Speech Volume | Adjustable at each Entry Panel and handset |
Wiring | Two common wires polarised for speech, call and lock release |
Ring tone | Electronic while button is depressed with separate tones when calling from each Entry Panel in a system or between groups of handsets |
Call Confirmation at Entry Panel | [*] |
Wiring Distance | Refer to thickness chart in the Manual |
Gate/Door Release | Potential-free normally-open contact |
Handset Auxiliary Contact | Requires separate wiring via two-wire bus |
Operating Temperature | -20°C to +50°C |
Humidity | 0 – 90% (non-condensing) |
Degree of Protection | IP55 |
Surge Protection | [*] |
Packaging Dimensions | |
Handset | Length: 70mm x Width: 47mm x Height: 211mm |
Entry Panel | Length: 70mm x Width: 40mm x Height: 150mm |
[*] – If the 12V DC gate motor supply dips when the motor starts up and the intercom is being used at the same time, the speech quality might be affected.
- 433Mhz operating frequency
- Transmitters with one to four buttons
- Transmitter quick and easy to open for battery replacement
- Belt or visor clip supplied as standard
- Transmitter body clip doubles as wall bracket
- Self-learning receivers with one, two and four channels
- Receivers incorporate stable narrow band technology
- Weatherproof housing for receiver
- Rolling/Code Hopping
- 433Mhz operating frequency
- Transmitters with one to four buttons
- Transmitter quick and easy to open for battery replacement
- Belt or visor clip supplied as standard
- Transmitter body clip doubles as wall bracket
- Self-learning receivers with one, two and four channels
- Receivers incorporate stable narrow band technology
- Weatherproof housing for receiver
- Rolling/Code Hopping
- 433Mhz operating frequency
- Transmitters with one to four buttons
- Transmitter quick and easy to open for battery replacement
- Belt or visor clip supplied as standard
- Transmitter body clip doubles as wall bracket
- Self-learning receivers with one, two and four channels
- Receivers incorporate stable narrow band technology
- Weatherproof housing for receiver
- Rolling/Code Hopping
- 433Mhz operating frequency
- Transmitters with one to four buttons
- Transmitter quick and easy to open for battery replacement
- Belt or visor clip supplied as standard
- Transmitter body clip doubles as wall bracket
- Self-learning receivers with one, two and four channels
- Receivers incorporate stable narrow band technology
- Weatherproof housing for receiver
- Rolling/Code Hopping
Centurion D5 Smart Gate Motor Battery 12V 6Ah
- Voltage: 12V
- Capacity: 6AH
Strictly for use with the D5 Smart gate Motor
- Quick, simple and secure enrolment process
- Weatherproof housing
- Incorporating secure Keeloq ?rolling code technology
- Quick and easy extern
- Available with 1, 2 or 4 channels
- Each channel can be selected for latching or non-latching output
- Input Voltage: 12/24V AC/DC
- Operating Frequency: 433 Mhz
- Relay Output: 1,2 or 4
- Relay Rating: 3A maximum
- Code Type: Rolling Code Keeloq® protocol
- Humidity: 0-90% non condensing
- Self-Learning Memory: Single = 62 & Multi = 250
- Weather Resistant: Yes
- Brand: Centurion Systems
- No. Channels: 1, 2 or 4
- Pack Quantity: 1
- Packaging: Boxed
- Depth: 32mm
- Height: 115mm
- Weight: 950g
- Width: 68mm
Centurion i5 Infrared gate safety beam set
Enhanced security features such as automatic closing, designed to ensure that the gates will always close automatically, are not recommended to be activated without the use of safety beams.
i5 infrared beams from CENTURION are simple to align, extremely reliable and boasts an operating range of up to 40m. It can be used on gates, garage doors, and even for simple perimeter protection.
The i5 beams are compatible with supply voltages from 12 to 40V DC. These versatile beams can be used on almost any gate or access automation equipment found in the market.
Main features
- Easy to align
With a massive 9m2 (3m x 3m) alignment area, the CENTURION i5 infrared beams practically aligns themselves! No more battling onsite with beams that simply won't align - the wide beeam cast by the i5 transmitter makes this formerly painful process an absolute dream!
- Highly cost-effective
One can't put a price on safety - but you'll be happy to know that CENTURION i5 beams deliver a highly cost-effective detection solution. With these CENTURIONs installed, your gate won't break your car and it won't break the bank either!
- Easy commissioning thanks to LED indicators
Both the transmitter and receiver are fitted with a green LED indicator to help you quickly and effortlessly commission the system and also helps you with any diagnostic exercises.
- Suits even the widest of entrances
i5 beams work over a distance of up to 40m, making it suitable for even very wide entrances. No matter how big the entrance, nothing is getting past i5!
- Compatible with Intruder-detection Alarms
Safety and security has always gone hand in hand, and i5 infrared gate safety beams further enhances this happy union via full compatibility with the Intruder-detection Alarms (a world first) found on certain CENTURION operators.
- Wide power input range
i5 offers you the freedom to use the power supply most suited for your application. It's automated gate safety without limitations!
SMARTGUARD Keypad Anti Knock Shield
Grade 304 Stainless Steel Brushed Finish
Our locks are constructed from tough, weather-resistant stainless steel – making them ideal for outdoor use – and vastly improve the security of access points via secure locking with an armature plate. In addition, the native door monitoring facility will electronically notify co-installed access control equipment of distress conditions such as door forced and door left open, further increasing security. Models are available for inward- and outward-opening gates with holding forces of 180kg and 600kg.
Centurion Polophone Anti Knock Shield
Grade 304 Stainless Steel
Brush Finish
BASE PLATE: 140mm x 140mm
HOT DIPPED GALVANISED
- Pedestal- and wall-mount configurations available – allows traffic light to be used alongside traffic barriers, sliding gates or virtually any automated access system
- Exceptionally easy assembly
- Impressive lifespan – approximately 50 000 hours
- Flexible input voltage range
- Durable aluminium construction
- Compact design
- High-quality LEDs visible in bright and low-light conditions
- Low power consumption - <6 watts
- Wing brackets allow traffic light to swivel left and right
- Quick, simple and secure enrolment process
- Weatherproof housing
- Incorporating secure Keeloq ?rolling code technology
- Quick and easy extern
- Available with 1, 2 or 4 channels
- Each channel can be selected for latching or non-latching output
- Input Voltage: 12/24V AC/DC
- Operating Frequency: 433 Mhz
- Relay Output: 1,2 or 4
- Relay Rating: 3A maximum
- Code Type: Rolling Code Keeloq® protocol
- Humidity: 0-90% non condensing
- Self-Learning Memory: Single = 62 & Multi = 250
- Weather Resistant: Yes
- Brand: Centurion Systems
- No. Channels: 1, 2 or 4
- Pack Quantity: 1
- Packaging: Boxed
- Depth: 32mm
- Height: 115mm
- Weight: 950g
- Width: 68mm
Centurion POLOphone Entry Panel
The POLOphone is a uniquely styled intercom system that offers outstanding features, state of the art design and excellent value for money. The POLOphone is also a proud winner of the prestigious SABS Design Institute’s Design Excellence Awards.
MAIN FEATURES:
- Only two wires for a simple, quick and easy installation.
- Expandable up to five components with a maximum of two Entry Panels.
- Each panel fitted with two Call Buttons.
- Single or dual call button Modes of Operation.
- Intercommunication between two groups of Handsets.
- Award-winning style Handset.
- Each handset incorporates:
– Gate release for each Entry Panel.
– Auxiliary control button.
– Intercommunication Call Button.
– Gate status LED. - 12V DC operation with optional battery backup.
- Built-in lightning protection.
- To maximise the security of the installation an optional POLOswitch1 may be fitted
POLOPHONE TECHNICAL DATA:
DESCRIPTION | |
---|---|
Input Voltage 1 | 12V – 14V DC supplied at anyone of the components 1 |
Current Draw | Quiescent – 150mA ±60mA for a One-to-One kit maximum – 200mA |
Speech Volume | Adjustable at each Entry Panel and handset |
Wiring | Two common wires polarised for speech, call and lock release |
Ring tone | Electronic while button is depressed with separate tones when calling from each Entry Panel in a system or between groups of handsets |
Call Confirmation at Entry Panel | [*] |
Wiring Distance | Refer to thickness chart in the Manual |
Gate/Door Release | Potential-free normally-open contact |
Handset Auxiliary Contact | Requires separate wiring via two-wire bus |
Operating Temperature | -20°C to +50°C |
Humidity | 0 – 90% (non-condensing) |
Degree of Protection | IP55 |
Surge Protection | [*] |
Packaging Dimensions | |
Handset | Length: 70mm x Width: 47mm x Height: 211mm |
Entry Panel | Length: 70mm x Width: 40mm x Height: 150mm |
[*] – If the 12V DC gate motor supply dips when the motor starts up and the intercom is being used at the same time, the speech quality might be affected.
Our locks are constructed from tough, weather-resistant stainless steel – making them ideal for outdoor use – and vastly improve the security of access points via secure locking with an armature plate. In addition, the native door monitoring facility will electronically notify co-installed access control equipment of distress conditions such as door forced and door left open, further increasing security. Models are available for inward- and outward-opening gates with holding forces of 180kg and 600kg.
- Quick, simple and secure enrolment process
- Weatherproof housing
- Incorporating secure Keeloq ?rolling code technology
- Quick and easy extern
- Available with 1, 2 or 4 channels
- Each channel can be selected for latching or non-latching output
- Input Voltage: 12/24V AC/DC
- Operating Frequency: 433 Mhz
- Relay Output: 1,2 or 4
- Relay Rating: 3A maximum
- Code Type: Rolling Code Keeloq® protocol
- Humidity: 0-90% non condensing
- Self-Learning Memory: Single = 62 & Multi = 250
- Weather Resistant: Yes
- Brand: Centurion Systems
- No. Channels: 1, 2 or 4
- Pack Quantity: 1
- Packaging: Boxed
- Depth: 32mm
- Height: 115mm
- Weight: 950g
- Width: 68mm
- Cage Only
- Grade 304 Stainless Steel - Brushed finish
- Excluding Padlock
Centurion Photon part wireless infrared safety beam set
(RECEIVER WIRED, TRANSMITTER WIRELESS)
PHOTON - INFRARED GATE SAFETY BEAMS WITH WIRELESS TECHNOLOGY
Safety has never been so quick and easy – thanks to wireless technology! Introducing CENTURION’s new Photon infrared gate safety beam with a wireless transmitter. Photon makes short work of achieving a safe automation system for even the most challenging of installations.
With a wireless transmitter there’s no need to tunnel under the driveway. Simply align, attach and you’re away!
The transmitter is completely wireless – being powered via two AA Alkaline batteries – obviating the need for tunnelling and digging and subsequent defacement of one’s driveway for the purpose of running cables. Not only does this arrangement allow for significant flexibility and fewer restrictions when it comes to mounting the beams, but it dramatically reduces material and labour costs.
Main features
- Wireless transmitter
So you want the ultimate in gate safety, but don’t necessarily want to ruin your beautiful cobblestone driveway to get it. No problem! The Photon infrared gate safety beams makes use of a completely wireless transmitter, allowing you to leave tunnelling and burrowing to the moles and saving you precious time and money.
- Easy on the eye
Who says safe can’t be sexy? Photon is only 50mm wide, making it unobtrusive and aesthetically pleasing. With sleek curves and attractive slim-line construction, these CENTURIONs are sure to enhance the aesthetics of any entrance lucky enough to be protected by them.
- Fully weatherproof enclosure
Mother Nature is a fickle dame, that much is true, but luckily Photon’s fully weatherproof enclosure ensures that the electronics will never bear the brunt of her outbursts. Oh, and did we mention that it’s ant-proof too?
- Long-distance performer
“No limits” is the maxim by which we engineered our semi-wireless safety beams and, with a 10m operating range, Photon is ideal for almost any entrance gate.
- Compatible with Intruder-detection Alarms
Safety and security has always gone hand in hand, and Photon infrared gate safety beams further enhance this happy union via full compatibility with the Intruder-detection Alarms (a world first) found on certain CENTURION operators.
- Low power consumption
The wireless transmitter beam requires only two AA batteries (included in the kit) to deliver five years of reliable operation. Low current-draw throughout the system means greater efficiency and a longer battery life, so you’ll have reliable automated gate safety for years to come.
Centurion Smartguard Keypad
- Multi-user capability
This access control keypad can accomodate up to 1000 unique PIN codes with any user-defined length fromone to ten digits.
- Selectively add and delete
User codes can also be selectively deleted without affecting other codes stored in the memory. This makes administering your access control database so quick and easy.
- Three, two, one...Delete!
The keypad also boasts a 'downcounter' allowing selected codes to have a limited number of uses. This is ideal for granting single occasion access, for example to an armed response company, with the code automatically deleting itself after use.
- Multichannel functionality
There are three separate outputs, each configurable to either latching or non-latching. Such functionality caters for many different scenarios for example, a motorised gate entrance may be opened fully using one code, activate the pedestrian opening another, and switching on the house alarm using a third.
- Secure - inside and out
The addition of the optional CENTURION SmartSwitch maximises security and ensures that even with the keypad mounted outside the property, it cannot be "hot-wired" and the integrity of the site jeopardised.
- Reliable memory backup
The same memory module used on the SupaNOVA may also be used on the CENTURION SMARTGUARD keypad, allowing all the settings and codes to be backed up and then later restored in seconds.
ZINC ELECTROPLATED.
SMARTGUARDAIR – WIRELESS ACCESS CONTROL KEYPAD
MAIN FEATURES:
- SMARTGUARDair for wireless, easy installations.
- 1000 unique codes using one to ten digits.
- 15 channel output.
- Selectively add and delete user codes.
- Backup Memory Module.
- Limited uses counter.
- Fully weatherproof with backlit keypad.
- Operates on two AA Alkaline batteries, or a separate 12V power supply.
- Up to two years of battery life with up to 300 uses per day.
- Operating range of up to 30 metres.
- Compatible with CENTURION code-hopping receivers.

D5-Evo Theft cage Kit 3 c/w Theft Cage
Ultra Seal
60mm Discuss Padlock