ALARM ACCESSORIES

• 16A Moulded plug. 1m long (South African Standard)

• Charger board Microprocessor controlled with low battery cutout at 10VDC. Input between 13.8 – 14.2VDC

• For use with ZX8SP, ZX8, PRT1, PGM4 and ADM2

• Provision for multiple module and panel mounting
• Many punch-out holes for simple wiring
• Easy door removal
• Convenient sizes:
•   - 20cm X 25.5cm X 7.6cm (8" x 10" x 3")
•   - 28cm X 28cm X 7.6cm (11" x11" x 3")

• Provides 7.5Vdc at 1A max
• Includes 1 of 5 different power outlets:
• - ACPEU (Europe)
• - ACPAUS (Australia)
• - ACPCH (China)
• - ACPUK (United Kingdom)
• - ACPUL (North America)
• Wire length: 182.9 cm

• For the K32 and K32 Wireless Keypads
• Provides 6Vdc at 350mA max
• Includes one of 5 different power outlets: ACPEU (Europe),
• ACPAUS (Australia), ACPCH (China), ACPUK (United-Kingdom) and ACPUL (North America)
• 6-foot wire

• Provision for multiple module and panel mounting
• Many punch-out holes for simple wiring
• Easy door removal
• Convenient sizes:
•   - 20cm X 25.5cm X 7.6cm (8" x 10" x 3")
•   - 28cm X 28cm X 7.6cm (11" x11" x 3")

• Our Intelligent Power Supply / Battery charger unit is designed to meet with international safety and certification standards. The unit has under and over voltage protection and is double fuse-protected. A truly Great New Product for all your 12V battery backup systems.

• Microprocessor Controlled charging output
• Low battery switch-off at 10V DC
• Buzzer tones on battery low and AC Fail
• Resettable Fuse protection on output
• Fuse protection on AC input
• ABS Plastic enclosure
• Alarm panel Battery backup
• CCTV Battery backup
• Backup power supply for door controller.
• Maglock for an Access Control solution

• Dimensions (LxBxH) : 200 x 180 x 80mm
• Gross Weight : 0.895Kg
• Operating Temp : -3°C to 65°C
• Input Voltage Range : 110V ~ 230V AC 50Hz
• Output Voltage : 13V ~ 14.4V Adjustable
• Max Current Output : 3.2A DC @ 14V
• Relay Contact Rating : 10A
• AC Fail Output Rating : 140mA Positive switching
• Warranty : 12 Months
  
  
• Requires 12V battery

• Our Intelligent Power Supply / Battery charger unit is designed to meet with international safety and certification standards. The unit has under and over voltage protection and is double fuse-protected. A truly Great New Product for all your 12V battery backup systems.

• Housing Fits a standard 18A/H Battery.
• Microprocessor Controlled charging output
• Low battery switch-off at 10V DC
• Buzzer tones on battery low and AC Fail
• Resettable Fuse protection on output
• Fuse protection on AC input
• ABS Plastic enclosure
• Alarm panel Battery backup
• CCTV Battery backup
• Backup power supply for door controller.
• Maglock for an Access Control solution

• Dimensions (LxBxH) : 315 x 230 x 100mm
• Gross Weight : 1.30Kg
• Operating Temp : -3°C to 65°C
• Input Voltage Range : 110V ~ 230V AC 50Hz
• Output Voltage : 13V ~ 14.4V Adjustable
• Max Current Output : 6.4A DCor 70Watts
• Relay Contact Rating : 10A
• AC Fail Output Rating : 140mA Positive switching
• Warranty : 12 Months
  
  
• Requires 12V 18AH Battery

Portable Battery Power Box 1 with Voltmeter and Power Accessories

Designed to fit a 12V 100AH Battery

Ideal for Caravans, Camping Trailers, Camping, 4x4 vehicles, Fishing, Electric Fences.

Features:

• Compact and Lightweight, ideal for travel
• The built-in LED voltmeter allows you to monitor the voltage of your battery to see when it is going flat.
• Two high current marine-grade cigarette power sockets.
• Two USB ports make it easy to recharge phones and accessories.
• There is a built-in circuit breaker so that you don't damage your sensitive electronics from too much power.
• High current bolt terminals to connect your higher current loads e.g inverter.
• External terminals allow you to recharge the battery without removing it from the box.
• Available with Two Anderson Plugs (Product Code N.BAT-12V.BOX02)

• DC to AC Inverter
• 140W Solar Panel (N.SOL-SYS140W)
• 140W Solar Panel Regulator (N.SOL-REG140)
• 10AMP to 20AMP Battery Charger